Dry laminating machine, working speed 250m/min, dual
|Kinds of laminating||Dry laminating production technics|
|Suitable material --- first substrate||BOPP,BOPET,BOPA,laminated film(10-50μm)|
|Suitable material --- second substrate||CPP,CPE,AL,paper(20-80μm)|
|Laminated width||900-1250mm (1500BII:1150-1500mm)|
|Diameter of the roll||Max.φ800mm|
|Structure of the coating unit||Two rollers coating structure|
Water-based:1 – 3.5 g/㎡
|Driven motor power||90.2 kw(not including oven energy source )|
|Power supply||380VAC±10%,50±2Hz,three-phase five-wire|
|Power of the heating supply (oven)|
Electric energy supply, steam supply,
thermal conductive oil supply
1. coating seal spaced blade device
2. adhesive automatically viscosity control device
3. sleeve type impressed rubber rollers
4. fixed point and checking coating control system
5 .high-performance energy saving and consumption
6. tension control system for dual-film of 2nd unwind device
7. substrate surface corona device
Summarize and function:
This series of machines is the first one that uses the industry
computer center control in China. It can control the mulit-motor
tension, logic action and coating weight accurately. It already
formed three products series such as solvent type, solventless type
and multi-function type. This series of machines can ensure the
high quality laminated products. What’s more, it also can furthest
reduce the customers’production cost by using the energy-saving,
consumption reducing, safety working condition emulational design.
For the materials, this equipment can apply to the multi-layers
continuous high speed laminating of the rolled material such as the
various bidirectional/ unidirectional stretching plastic film etc.
1. 1st Unwind unit: Reel change & auto splicing: duplex turret
structure, synchronous pre-motion of spare web, non-stop automatic
splicing, equipped with upper cutter (linked with self-locked
safeguard pneumatic cylinder).
2. In-feed unit: Structure: consists of active drawing roller,
passive rubber roller and tension auto-control device.
3. Coating unit: Coating tank, semi-enclosed style, stainless
steel, gear chain style vertical lift with hand-wheel operation
(adhesive supply device with constant temperature control is for
4. Drying chamber: Drying style: hot air jet nozzles drying style,
including three-section drying chamber, pneumatic cylinder control
the switch of drying chamber.
5. 2 nd unwind uint: Structure and date the same winder
position,mater feeding configure upper cutter and down cutter.
6. Rewind unit: auto-splicing & reel change duplex turret
structure, pre-motion of spare web keep at synchronization,
automatic non-stop splicing for reel change, horizontal moving type
dual cutter device.
1. Stability performance:
The structure of the whole machine has the logical design, high
machining precision which can adopt to high speed production. In
the same time, the control system of the whole machine has the
complete function, high automatic degree and can be controlled by
2. Advanced performance:
This series of machines is the 2002 year National Key New Product,
National Level Torch Plan Project and Guangdong Province High New
Tech Product.. After 15 years of continuous improvement and
innovation, we have already formed the full line scientific
research & design & precise manufacturing system and full
line product specification & grade supply system.
3. Technical differences:
Inner layer laminated substrate is nearly 3-4mm/m; with non-stop
automatic roll exchange and film feeding. The heat energy
consumption of the oven can be reduced 42% - 65 % and the exhaust
waste gas of the oven can be reduced 45% - 66%. It is suitable for
the laminating technics of water-based adhesive and chemical-based
adhesive. t-size: 10.0pt;mso-bidi-font-family:Calibri'>Advanced
performance: This series of machines is the 2002 year National Key
New Product, National Level Torch Plan Project and Guangdong
Province High New Tech Product.. After 15 years of continuous
improvement and innovation, we have already formed the full line
scientific research & design & precise manufacturing system
and full line product specification & grade supply system.
Shantou Huaying Soft-Packing Equipment Plant Ltd.
Contacts :May Wu
TEL: 0086 754 88226231
ADD:B2-B4, Block 9, Jinyuan Industrial Park, Chaoshan Road,
Post Code: 515064
Fax: 0086 754 88226282